Fasto E180 - Structural Adhesives
Features of E180H-R
Fasto E180 - Structural Adhesives
Features of E180H-R

Fasto E180 – High Strength Two-Part Epoxy Adhesive

Fasto E180 is a high-performance, high-strength, two-part epoxy adhesive designed for bonding, sealing, and holding a wide variety of substrates. It delivers exceptional mechanical strength and outstanding chemical resistance, making it ideal for structural and load-bearing applications across multiple industries.

Fasto E180 forms a tough, durable bond on metals and non-metals alike, ensuring long-term reliability even under heat, chemical exposure, and mechanical stress.

- +

Key Features

  • Two-Part Pure Epoxy System
    Provides strong, permanent structural bonds.
  • High Mechanical Strength
    • Compressive strength: 78 N/mm²
    • Tensile strength: 32 N/mm²
  • Excellent Chemical & Solvent Resistance
    Resistant to oils, fuels, brake fluid, propanol, and water.
  • Wide Substrate Compatibility
    Bonds steel, aluminum, brass, ceramic, concrete, wood, rubber, and more.
  • Good Gap Filling Capability
    Fills gaps up to 0.5 mm.
  • Extended Working Time
    30–40 minutes, allowing accurate positioning of components.
  • High Temperature Resistance
    Continuous service from -10°C to +150°C.

Benefits

  • Ensures strong, long-lasting structural bonds
  • Suitable for small, medium, and large assemblies
  • Reduces mechanical fasteners and welding requirements
  • Performs reliably in chemically aggressive environments
  • Ideal for manufacturing, maintenance, and repair applications
Primary ApplicationSub-ApplicationsFunctional PurposeKey Performance Advantage
Structural Bonding of Metal ComponentsSteel, aluminium, brass assembliesHigh-strength structural bondingVery high tensile & compressive strength
Machine Assembly & ManufacturingSmall, medium & large machine assembliesSecure bonding & holding of componentsLong working time enables precise assembly
Ceramic & Glass Component BondingCeramic parts, glass componentsRigid, durable bondingExcellent adhesion on rigid substrates
Multi-Substrate BondingMetal, ceramic, concrete, wood, rubber combinationsBond dissimilar materialsBroad substrate compatibility
Industrial Repair & MaintenanceRepair of worn or broken partsRestore component integrityHigh gap-filling ability (up to 0.5 mm)
Medical & Precision Machinery AssemblyMedical devices, precision equipmentReliable, high-strength jointsStrong fixing with dimensional stability
Chemical-Resistant Bonding ApplicationsAssemblies exposed to oils & solventsLong-term durabilityExcellent chemical & solvent resistance
Load-Bearing Industrial JointsStructural joints under static loadMaintain joint integrityRetains strength at elevated temperatures

Surface Preparation

  • Ensure bonding surfaces are clean, dry, and free from oil, grease, dust, and contaminants.
  • Surface cleaning may be required depending on the substrate.

Mixing Instructions

Supplied as resin (Part A) and hardener (Part B) in the correct mixing ratio.

Mixing ratio: 10 : 8

  1. Stir Part A thoroughly to re-disperse fillers.
  2. Add the measured hardener to the resin.
  3. Mix by hand or slow-speed mixer for 2–3 minutes until a uniform colour is achieved.
  4. Incomplete mixing can cause poor curing and reduced strength.

Application Method

  1. Apply the mixed adhesive by pouring or brushing onto the prepared surface.
  2. Assemble parts within the working time (30–40 minutes).
  3. Allow the assembly to remain undisturbed until required strength is achieved.

Curing Guidelines

  • Working time: 30–40 minutes
  • Full cure: 24 hours
  • Cure speed depends on temperature, substrate, and mixed mass.
  • Heating the assembly can accelerate curing.

To access Technical & Safety Documents, please submit your details.








    Related products

    Scroll to Top