Fasto UV92 - UV Adhesives
Features of UV92
Fasto UV92 - UV Adhesives
Features of UV92

Fasto UV92 – High Strength UV Curable Adhesive for Glass Bonding

Fasto UV92 is a single-component, very low viscosity, UV-curable adhesive engineered to deliver super high strength, transparent, and flexible bonds when exposed to UV light. It is specially formulated for glass-to-glass and glass-to-metal bonding, where optical clarity, non-yellowing performance, and precision assembly are essential.

With its excellent capillary action, Fasto UV92 can easily wick into pre-assembled joints, making it ideal for decorative and engineering-grade glass assemblies.

- +

Key Features

  • UV Light Curing (≥310 nm)
    Rapid curing upon exposure to UV radiation.
  • Very Low Viscosity (~55 cPs)
    Enables capillary flow into tight and pre-assembled joints.
  • Super High Bond Strength
    Compressive shear strength on glass up to 27 N/mm².
  • Crystal Clear & Non-Yellowing
    Maintains long-term transparency and aesthetics.
  • Flexible Bond After Cure
    Absorbs minor stresses and vibrations.
  • Fast Fixture Time
    Achieves handling strength in less than 5 seconds under UV light.

Benefits

  • Creates invisible, high-clarity glass joints
  • Enhances aesthetic appeal of glass furniture and assemblies
  • Enables fast, controlled, and repeatable curing
  • Ideal for precision glass bonding applications
  • Reduces rework due to accurate and clean bonding
Primary ApplicationSub-ApplicationsFunctional PurposeKey Performance Advantage
High-Strength Glass-to-Glass BondingGlass panels, precision glass jointsStructural transparent bondingVery high compressive shear strength
Glass-to-Metal BondingDecorative fittings, engineered jointsSecure bonding of dissimilar substratesExcellent adhesion with optical clarity
Decorative Glass AssemblyFurniture glass parts, aesthetic jointsClean, invisible jointsNon-yellowing, crystal-clear bond
Engineering Glass AssembliesLoad-bearing or precision glass componentsHigh-strength structural bondingSuper high bond strength with flexibility
Pre-Assembled Glass Component BondingCapillary joints, tight-fit assembliesAdhesive wicks into joints before curingVery low viscosity for capillary action
Precision Transparent BondingVisible joints requiring clarityMaintains visual appearanceControlled UV curing after alignment
High-Accuracy Manufacturing ProcessesAssemblies requiring exact positioningOn-demand curing after placementUV-activated, fast fixture time

Surface Preparation

  • Ensure bonding surfaces are clean, dry, and free from oil, grease, dust, and contaminants.
  • Protect the adhesive from premature UV light exposure before application.

Application Method

  1. Apply Fasto UV92 to one bonding surface.
  2. Assemble and align the parts accurately.
  3. Expose the bond area to UV light (310 nm or above) to initiate curing.
  4. Ensure complete exposure of the bond line for uniform curing.

Curing Guidelines

  • Fixture time:
    • <5 seconds @ 10 mW/cm²
    • <3 seconds @ 30 mW/cm²
  • Typical depth of cure: ~2 mm
  • Maximum recommended bond depth: ~3 mm
    (Greater depths possible using high-intensity UV lamps and longer exposure)

Additional Notes

  • UV lamps are recommended for controlled and repeatable curing.
  • Sunlight can cure the adhesive, but results may vary.
  • Use UV-opaque (black) tubing for dispensing systems to prevent premature curing.

To access Technical & Safety Documents, please submit your details.








    Related products

    Scroll to Top