Fasto CA10 - Instant Cyanoacrylate Adhesive
Features of CA10
Fasto CA10 - Instant Cyanoacrylate Adhesive
Features of CA10

Fasto CA10 – Instant Cyanoacrylate Adhesive

Fasto CA10 is a low-viscosity, high-strength, very fast-curing ethyl cyanoacrylate adhesive, specially formulated for rapid bonding of difficult-to-bond substrates. Its ultra-fast fixture time and excellent adhesion make it ideal for rubber, plastics, leather, paper, and general industrial assembly applications.

Fasto CA10 delivers instant handling strength, enabling high-speed production and reduced assembly time.

- +

Key Features

  • Very Fast Curing
    Fixture time as low as 2–3 seconds on close-fitting parts.
  • Low Viscosity Formulae (3–5 cPs)
    Ideal for capillary action and precision bonding.
  • High Bond Strength
    Provides strong and durable joints on a wide range of substrates.
  • Excellent Adhesion to Difficult Materials
    Suitable for leather, rubber, plastics, and paper.
  • Good Chemical Resistance
    Resistant to oils and common solvents.
  • Easy Application
    Hand-applied directly from bottle for quick use.

Benefits

  • Enables instant bonding and faster production cycles
  • Reduces clamping and holding time
  • Ideal for precision assemblies and small components
  • Ensures clean, strong bonds with minimal adhesive usage
  • Improves productivity in industrial and repair applications
Primary ApplicationSub-ApplicationsFunctional PurposeKey Performance Advantage
Ultra-Fast Precision BondingSmall parts, close-fitting componentsImmediate fixation with minimal handling timeExtremely fast fixture time
Plastic & Rubber BondingPlastics, elastomers, rubber componentsHigh-speed assembly of polymer partsVery rapid cure on plastics & rubber
Leather & Difficult Substrate BondingLeather goods, flexible materialsReliable bonding of traditionally hard-to-bond substratesOptimized formulation for difficult surfaces
Electronics & Light Component FixingLightweight electronic parts, connectorsQuick positioning during assemblyLow viscosity for precise, thin bond lines
Industrial & OEM AssemblyOEM components, sub-assembliesHigh-throughput production bondingConsistent fast curing, improved productivity
Maintenance & Quick RepairsOn-site fixes, emergency repairsImmediate functional bondingMinimal clamp time, quick turnaround
Paper & Utility BondingPaper parts, general utility componentsRapid bonding of absorbent materialsFast cure on porous substrates

Surface Preparation

  • Ensure bonding surfaces are clean, dry, and free from oil, grease, and contaminants.
  • Proper alignment of parts is essential due to the very fast cure speed.

Application Method

  1. Apply a small amount of Fasto CA10 to one surface only.
  2. Join parts immediately and press firmly together.
  3. Hold until handling strength is achieved (usually within seconds).
  4. Avoid over-application, as excess adhesive may slow curing and reduce bond strength.

Curing Guidelines

  • Fixture time: 2–3 seconds
  • Full cure: 24 hours
  • Best results achieved on close-fitting joints (≤ 0.10 mm gap)

Additional Notes

  • Cure speed depends on humidity, temperature, and substrate type.
  • For low surface energy plastics (PP, PE, PTFE), use a Fasto Cyanoacrylate Activator.
  • For disassembly, use Fasto CA Debonder.

To access Technical & Safety Documents, please submit your details.








    Related products

    Scroll to Top