Fasto E180 - Structural Adhesives
Fasto E180 - Structural Adhesives

Fasto E180 – High Strength Two-Part Epoxy Adhesive

Fasto E180 is a high-performance, high-strength, two-part epoxy adhesive designed for bonding, sealing, and holding a wide variety of substrates. It delivers exceptional mechanical strength and outstanding chemical resistance, making it ideal for structural and load-bearing applications across multiple industries.

Fasto E180 forms a tough, durable bond on metals and non-metals alike, ensuring long-term reliability even under heat, chemical exposure, and mechanical stress.

- +

Key Features

  • Two-Part Pure Epoxy System
    Provides strong, permanent structural bonds.
  • High Mechanical Strength
    • Compressive strength: 78 N/mm²
    • Tensile strength: 32 N/mm²
  • Excellent Chemical & Solvent Resistance
    Resistant to oils, fuels, brake fluid, propanol, and water.
  • Wide Substrate Compatibility
    Bonds steel, aluminum, brass, ceramic, concrete, wood, rubber, and more.
  • Good Gap Filling Capability
    Fills gaps up to 0.5 mm.
  • Extended Working Time
    30–40 minutes, allowing accurate positioning of components.
  • High Temperature Resistance
    Continuous service from -10°C to +150°C.

Benefits

  • Ensures strong, long-lasting structural bonds
  • Suitable for small, medium, and large assemblies
  • Reduces mechanical fasteners and welding requirements
  • Performs reliably in chemically aggressive environments
  • Ideal for manufacturing, maintenance, and repair applications
Primary Application Sub-Applications Functional Purpose Key Performance Advantage
Structural Bonding of Metal Components Steel, aluminium, brass assemblies High-strength structural bonding Very high tensile & compressive strength
Machine Assembly & Manufacturing Small, medium & large machine assemblies Secure bonding & holding of components Long working time enables precise assembly
Ceramic & Glass Component Bonding Ceramic parts, glass components Rigid, durable bonding Excellent adhesion on rigid substrates
Multi-Substrate Bonding Metal, ceramic, concrete, wood, rubber combinations Bond dissimilar materials Broad substrate compatibility
Industrial Repair & Maintenance Repair of worn or broken parts Restore component integrity High gap-filling ability (up to 0.5 mm)
Medical & Precision Machinery Assembly Medical devices, precision equipment Reliable, high-strength joints Strong fixing with dimensional stability
Chemical-Resistant Bonding Applications Assemblies exposed to oils & solvents Long-term durability Excellent chemical & solvent resistance
Load-Bearing Industrial Joints Structural joints under static load Maintain joint integrity Retains strength at elevated temperatures

Surface Preparation

  • Ensure bonding surfaces are clean, dry, and free from oil, grease, dust, and contaminants.
  • Surface cleaning may be required depending on the substrate.

Mixing Instructions

Supplied as resin (Part A) and hardener (Part B) in the correct mixing ratio.

Mixing ratio: 10 : 8

  1. Stir Part A thoroughly to re-disperse fillers.
  2. Add the measured hardener to the resin.
  3. Mix by hand or slow-speed mixer for 2–3 minutes until a uniform colour is achieved.
  4. Incomplete mixing can cause poor curing and reduced strength.

Application Method

  1. Apply the mixed adhesive by pouring or brushing onto the prepared surface.
  2. Assemble parts within the working time (30–40 minutes).
  3. Allow the assembly to remain undisturbed until required strength is achieved.

Curing Guidelines

  • Working time: 30–40 minutes
  • Full cure: 24 hours
  • Cure speed depends on temperature, substrate, and mixed mass.
  • Heating the assembly can accelerate curing.

To access Technical & Safety Documents, please submit your details.

    Related products

    error:
    Scroll to Top