Fasto CA95 - Instant Cyanoacrylate Adhesive
Features of CA95
Fasto CA95 - Instant Cyanoacrylate Adhesive
Features of CA95

Fasto CA95 – High Strength Instant Cyanoacrylate Adhesive

Fasto CA95 is a low-medium viscosity, high-strength ethyl cyanoacrylate adhesive engineered for rapid bonding across a wide range of substrates, including some porous materials. Its very fast cure speed and reliable mechanical strength make it ideal for industrial assembly, maintenance, and precision bonding applications.

Designed for close-fitting parts and smooth surfaces, Fasto CA95 delivers consistent performance where speed, strength, and control are critical.

- +

Key Features

  • Very Fast Curing Performance
    Fixture time ranges from 2 to 20 seconds, depending on substrate.
  • Low-Medium Viscosity (34–43 cPs)
    Balanced flow for controlled application with minimal run-off.
  • High Bond Strength
    Tensile strength up to 21 N/mm² for durable joints.
  • Wide Substrate Compatibility
    Bonds plastics, rubber, metals, and other common materials.
  • Excellent Chemical & Solvent Resistance
    Resistant to oils, fuels, and common industrial solvents.
  • Good Heat & Ageing Resistance
    Retains strength after prolonged exposure to elevated temperatures.

Benefits

  • Enables high-speed assembly and reduced cycle times
  • Ensures strong, consistent bonds on close-fitting parts
  • Improves process efficiency in OEM and maintenance operations
  • Suitable for precision bonding with controlled adhesive flow
  • Delivers reliable performance in demanding industrial environments
Primary ApplicationSub-ApplicationsFunctional PurposeKey Performance Advantage
Precision Component BondingClose-fitting parts, small assembliesInstant bonding of accurately matched componentsVery fast fixture time, high bond strength
Plastic & Rubber BondingPlastic parts, rubber componentsStrong, rapid adhesion on non-porous materialsOptimized cure speed on plastics & elastomers
Metal & Mixed Substrate BondingMetal-to-metal, metal-to-plastic jointsQuick structural bondingHigh tensile strength, thin bond line
Electronics & Electrical AssemblySmall electronic parts, connectorsFast positioning and fixationControlled viscosity, precise application
Automotive & Mechanical AssemblyClips, trims, small mechanical partsRapid assembly during productionFast handling strength, reliable bonding
General Industrial Repair & FixingEmergency repairs, maintenance tasksImmediate functional bondingMinimal clamp time, quick turnaround
Smooth & Even Surface BondingPolished or machined surfacesUniform bond formationBest performance on close-fitting joints

Surface Preparation

  • Ensure bonding surfaces are clean, dry, and free from oil, grease, dust, and contaminants.
  • Proper alignment of components is essential due to rapid curing behavior.

Application Method

  1. Apply a thin, sparing amount of Fasto CA95 to one surface only.
  2. Join parts immediately and press firmly together.
  3. Hold until handling strength is achieved.
  4. Avoid over-application, as excess adhesive may slow cure speed and reduce bond strength.

Curing Guidelines

  • Fixture time: 2–20 seconds
  • Full cure: 24 hours
  • Maximum gap fill: 0.10 mm
  • Best results on close-fitting, smooth surfaces

Additional Notes

  • Cure speed depends on humidity, temperature, and substrate type.
  • Acidic surfaces (paper, leather) may exhibit slightly longer cure times.
  • For rework or disassembly, use Fasto CA Debonder (complete removal from fabrics is not possible).

To access Technical & Safety Documents, please submit your details.








    Related products

    Scroll to Top